Custom Design

Sample Requests

Submit Inquiry

My Subscription

Home

HMC959LC3

26 GHz, Divide-By-4 SMT with Reset & Programmable Output Voltage

Product Details

Request Data Sheet
ECCN: 3A001.a.11.b

Quality & Reliability

Press & Media
Data/
Clock Rate (Gbps/GHz)		 Function Rise/Fall Time
(ps)		 Diff. Output Swing (Vp-p) DC Power Consumption (mW) DC Power Supply (Vdc) Package
- / 26 Clock Divide-by-4 19 / 19 0.8 - 1.8 281 -3.3 LC3

Features

• Differential & Singe-Ended Operation
• Fast Rise and Fall Times: 19 ps
• Low Power Consumption: 281 mW typ.
• Programmable Differential Output
   Voltage Swing: 800 - 1800 mVp-p
• Propagation Delay: 121 ps
• Single Supply: -3.3V
• 16 Lead 3x3mm SMT Package: 9mm²

Typical Applications

• High Speed Frequency Divider
   (up to 26 GHz)
• Broadband Test & Measurement
• Clock Synthesis
• Phase Locked Loops

Functional Diagram

General Description

The HMC959LC3 is a Divide-by-4 with Reset designed to support clock frequencies as high as 26 GHz. During normal operation, with the reset pin not asserted, the output toggles from its prior state on the positive edge of the clock. This results in a divide-by-four function of the clock input. Asserting the reset pin forces the Q output low regardless of the clock edge state (asynchronous reset assertion). Reversing the clock inputs allows for negative-edge triggered applications. The HMC959LC3 also features an output level control pin, VR, which allows for loss compensation or for signal level optimization.


All input signals to the HMC959LC3 are terminated with 50 Ω to ground on-chip, and may be either AC or DC coupled. Outputs can be connected directly to a 50 Ω terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ω to a non-ground DC voltage. The HMC959LC3 operates from a single -3.3 V DC supply and is available in a ceramic RoHS-compliant 3x3 mm SMT package.