Custom Design

Engineering Tools

Product Support

Quality & Reliability

Sample Requests

Submit Inquiry

Literature Request

My Subscription

Home

HMC860LP3E

Quad Low Noise High PSRR Linear Voltage Regulator SMT

Product Details

Data Sheet
Package Layout
Tape & Reel
ECCN: EAR99

Quality & Reliability

Environmental Data Sheet
Qualification Test Reports

Press & Media

Featured Article
Product Press Release
Input Volt. (V) Function Output Volt. (V) Output Current (mA) Power Supply Rej. Ratio (PSRR) (dB) Output Noise Spectral Density (nV/√Hz) Regulated Outputs Package
3.35 - 5.6 Quad High PSRR 2.5 - 5.2 15 - 100 80 @ 1 kHz, 60 @ 1 MHz 7 @ 1 kHz, 3 @ 10 kHz 4 LP3

Features

• Ultra Low Noise:
    3nV/√Hz at 10 kHz,
    7nV/√Hz at 1 kHz
• High Power Supply Rejection
    Ratio (PSRR)
    80 dB at 1 kHz, 60 dB at 1 MHz
• Four Voltage Outputs:
    VR1 @ 3V / 75 mA
    VR2, VR3 @ 3V / 15 mA
    VR4 @ 4.5V / 100 mA
• Adjustable Outputs: 2.5V to 5.2V
• Low Power-Down Current: <1 μA
• 16 Lead 3x3mm SMT Package: 9mm²

Typical Applications

• Test Instrumentation
• Military Radios, Radar and ECM
• Basestation Infrastructure
• Ultra Low Noise
   Frequency Generation
• Fractional-N Synthesizer Supply
• Mixed-Signal Circuit Supply

Functional Diagram

General Description

The HMC860LP3E is a BiCMOS ultra low noise quad-output voltage regulator. It features a low noise band-gap reference externally decoupled for best in-close noise performance. High Power Supply Rejection Ratio (PSRR) in the 0.1 MHz to 10 MHz range provides excellent rejection of preceding switching regulator noise. The four voltage outputs are ideal for frequency generation subsystems including Hittite's broad line of PLLs with Integrated VCOs. Each output voltage can be adjusted higher or lower than the default value by using one external resistor.


Each output can be set to 5V by grounding the corresponding HV pin. The regulator can be powered down by the TTL-compatible Enable input. The HMC860LP3E is housed in a 3x3mm QFN SMT package.