Custom Design

Sample Requests

Submit Inquiry

My Subscription

Home

Discontinued Product Notice
Please be advised that Hittite Microwave has discontinued this product.

Product Change Notification Date Last Time Buy Date Replacement Product(s)
April 13, 2012 October 29, 2012


HMC853LC3C

28 Gbps D-Type Flip-Flop w/Programmable Output Voltage

Product Details

Data Sheet
Package Layout
Tape & Reel
ECCN: 3A001.a.11.b

Quality & Reliability

Environmental Data Sheet
Qualification Test Reports
Product Change Notification

Press & Media

Product Press Release
Data/
Clock Rate (Gbps/GHz)		 Function Rise/Fall Time
(ps)		 Diff. Output Swing (Vp-p) DC Power Consumption (mW) DC Power Supply (Vdc) Package
28 / 28 D-Type Flip-Flop 15 / 14 0.7 - 1.3 260 -3.3 LC3C

Features

• Differential & Singe-Ended Operation
• Fast Rise and Fall Times: 15 / 14 ps
• Low Power Consumption: 240 mW typ.
• Programmable Differential
   Output Voltage Swing: 700 - 1300 mV
• Single Supply: +3.3V
• 16 Lead 3x3mm SMT Package: 9mm²

Typical Applications

• RF ATE Applications
• Broadband Test & Measurement
• Serial Data Transmission
   up to 28 Gbps
• Digital Logic Systems up to 28 GHz

Functional Diagram

General Description

The HMC853LC3C is a D-type Flip-Flop designed to support data transmission rates of up to 28 Gbps, and clock frequencies as high as 28 GHz. During normal operation, data is transferred to the outputs on the positive edge of the clock. Reversing the clock inputs allows for negative-edge triggered applications. The HMC853LC3C also features an output level control pin, VR, which allows for loss compensation or for signal level optimization.


All input signals to the HMC853LC3C are terminated with 50 Ohms to ground on-chip, and maybe either AC or DC coupled. The differential outputs of the HMC853LC3C may be either AC or DC coupled. Outputs can be connected directly to a 50 Ohm to ground terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to a non-ground DC voltage. The HMC853LC3C operates from a single -3.3V DC supply and is available in a ceramic RoHS compliant 3x3 mm SMT package.