Custom Design

Sample Requests

Submit Inquiry

My Subscription

HMC1010LP4E

RMS Power Detector SMT, DC - 3.9 GHz

Product Details

Data Sheet
Package Layout
Tape & Reel
ECCN: EAR99

Quality & Reliability

Environmental Data Sheet
Qualification Test Reports

Press & Media

Product Press Release

Life Cycle Status

Production, Recommended for New Designs

Freq. (GHz) Function Dynamic Range (dB) RSSI Slope (mV/dB) RF Threshold Level (dBm) Bias Supply Package
DC - 3.9 RMS Detector 60 ± 1 37 -69 +5V @ 50mA LP4

Features

• ±1 dB Detection Accuracy to 3.9 GHz
• Input Dynamic Range: -50 to +10 dBm
• Digitally Programmable
   Integration Bandwidth
• RF Signal Wave Shape
   & Crest Factor Independent
• +5V Operation from -40°C to +85°C
• Excellent Temperature Stability
• Power-Down Mode
• 24 Lead 4x4mm SMT Package: 16mm²

Typical Applications

• Log –> Root-Mean-Square
   (RMS) Conversion
• Received Signal Strength
   Indication (RSSI)
• Transmitter Signal Strength
   Indication (TSSI)
• RF Power Amplifier Efficiency Control
• Receiver Automatic Gain Control
• Transmitter Power Control

 

Functional Diagram

HMC1010LP4E Functional Diagram

General Description

The HMC1010LP4E Power Detector is designed for RF power measurement, and control applications for frequencies up to 3.9 GHz. The detector provides an accurate RMS representation of any RF/IF input signal. The output is a temperature compensated monotonic, representation of real signal power, measured with an input sensing range of 60 dB.


The HMC1010LP4E is ideally suited to those wide bandwidth, wide dynamic range applications, requiring repeatable measurement of real signal power, especially where RF/IF wave shape and/or crest factor change with time.


The integration bandwidth of the HMC1010LP4E is digitally programmable with the use of input pins SC I1- 4 with a range of more than 4 decades. This allows the user to dynamically set the operation bandwidth providing the capability of handling different types of modulations on the same platform.


The HMC1010LP4E features an internal op-amp at output stage, which provides for slope & intercept adjustments and enables controller application.