Custom Design

Sample Requests

Submit Inquiry

My Subscription

EKIT01-HMC6383

Programmable Direct Conversion Receiver, 700 to 3000 MHz

Product Details

ECCN: 3A001.a.11.b

Quality & Reliability

Press & Media

Featured Article
Product Press Release
Product Application Video

Life Cycle Status

Production, Recommended for New Designs

Product Support

User's Manual
Eval. PCB Schematic
Software Download

Frequency Input (MHz) 3 dB Bandwidth @ Antenna (MHz) IIP3 / IIP2 (dBm) NF (dB) Image Rejection (dB) Current Consumption (mA)
700 - 3000 Programmable 7 to 100 +25 / +60 16 ~80 1.2A @ +5.5V

Programmable Direct Conversion Receiver, 700 to 3000 MHz

Hittite's HMC6383 features unparalleled receiver flexibility and industry leading performance.

Typical Applications

Receiver Evaluation Design Platform for:

• Cellular Infrastructure

• Microwave Radio

• Adaptive IF Receivers

• Software Defined Radios

• Multipurpose Receivers

Features

• Wideband Input Frequency
   Coverage From 700 to 3000 MHz

• Precisely Programmable 3 dB Bandwidth From
   3.5 to 50 MHz Baseband (7 to 100 MHz RF)
   Within +/- 2.5% Bandwidth Accuracy

• 90 dB of Distributed Programmable Gain

• High Linearity (> 60 dBm IP2)

• Integrated, Seamless, Image Rejection Calibration
   Algorithm With ~80 dB of Image Rejection

General Description

Hittite's HMC6383 evaluation development kit is a set of high performance Hittite components configured as a multi-purpose receiver that can be used as a subsystem building block in numerous receiver applications. The receiver design demonstrates a common platform across various standards, jurisdictions, and bands of operation, and can be pre-programmed or field programmed to suit individual deployments. This highly configurable, high-performance solution significantly reduces cost and complexity of manufacturing, deploying, and supporting standard and region specific equipment.


The HMC6383 evaluation development kit includes a full software suite to control and configure all parts of the receiver. The flexible approach to the DCR enables the system designer to observe and understand effects and implications of component parameters on the overall system performance. Flexible hardware allows the designer to test and fine tune the system design using real-world signal input conditions and to compare measured results with expected performance. Data can be stored for further processing and analysis.


Market leading performance combined with a robust fully configurable design make the HMC6383 evaluation platform a logical starting point in designing a modular, highly-configurable, multi-purpose receiver module.

DCR Evaluation Board Includes the Following HMC Components:

Part Number
Description
QTY
Wideband PLL
2
High Speed Multi-Mode A/D Converter
1
50 MHz Dual Programmable Low Pass Filter with Driver
1
DC to 100 MHz Dual Digital VGAs with Driver
2
100 to 4000 MHz Wideband Direct Demodulator
1
Low Noise Linear Voltage Regulators
3
Low Noise Linear Voltage Regulator
1

 

Functional Diagram

Product & Technical Support

Please contact us at dcr@hittite.com for all product inquiries.