For Immediate Release
Chelmsford, MA 08/06/2012 -
Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for communication & military markets, has launched two exciting new SMT packaged clock generators, the HMC1033LP6GE and the HMC1035LP6GE. Ideal for a wide range of high performance Clock and Timing applications, these devices deliver best-in-class jitter and industry-leading phase noise floor.
The HMC1033LP6GE and the HMC1035LP6GE expand the company's growing Clocks & Timing portfolio by offering programmable frequency synthesis from 25 MHz to 2.5 GHz in both integer and fractional relationships to their reference clocks. The HMC1033LP6GE is ideal for clocking DSP, FPGA and high performance processors as well as physical layer devices, and operates from 25 MHz to 550 MHz. The HMC1035LP6GE is designed to meet the stringent requirements of high speed data converters (ADC/DAC) with excellent phase noise floor performance of -162 dBc/Hz, and operates from 25 MHz to 2.5 GHz. Both devices require only a single 3.3V supply rail and achieve up to 33% reduction in power consumption compared to previous solutions. The devices feature a flexible output buffer, which can be programmed via the serial programming interface (SPI) to support 12 different output amplitude settings including those for LVDS-compatible, and LVPECL signaling. A proprietary 'Exact Frequency Mode' of operation reduces frequency errors in fractional-N synthesis mode while maintaining excellent noise and spur performance.
Both products offer two modes of operation to trade off performance in favor of reduced power consumption. These two modes are defined as "Power Priority" and "Performance Priority" and may be selected via the SPI registers. In the "Power Priority" mode, the HMC1035LP6GE sources 173 mA typical current from the 3.3V supply with 2.5 GHz LVDS-compatible outputs, and in "Performance Priority" mode, the device achieves an integrated phase jitter performance of 100 fs RMS typical (12 kHz to 20 MHz integration bandwidth, 2.5GHz outputs), and improves interface Bit-Error-Rates (BER ) and eye diagram metrics. Both devices also produce an excellent 49-51% output duty cycle on their differential output.
The HMC1033LP6GE and the HMC1035LP6GE may be used to generate the sample clocks for high speed data converters (ADCs & DACs) in cellular infrastructure and fiber optic applications. With their very low phase noise floor, the clock generators improve the SNR (Signal-to-Noise-Ratio) performance of data converters by providing very clean sample and device clocks.
The HMC1033LP6GE and the HMC1035LP6GE are each assembled in 6 x 6 mm plastic leadless surface mount packages, and support operation over the -40 °C to +85 °C temperature range. Evaluation Kits with easy-to-use USB programming capability and GUI-based programming software to set the desired register configuration are available from Hittite.
Samples and evaluation PC boards for all SMT packaged products are available from stock and can be ordered via the company's e-commerce site or via direct purchase order. Released data sheets are available on-line at www.hittite.com.
Hittite Microwave Corporation is an innovative designer and manufacturer of high performance integrated circuits, or ICs, modules, subsystems and instrumentation for technically demanding digital, RF, microwave and millimeterwave applications covering DC to 110 GHz. The Company's standard and custom products apply analog, digital and mixed-signal semiconductor technologies, which are used in a wide variety of wireless / wired communication and sensor applications for Automotive, Broadband, Cellular Infrastructure, Fiber Optics & Networking, Microwave & Millimeterwave Communications, Military, Test & Measurement, and Space markets. The Company is headquartered in Chelmsford, Massachusetts.
PR Contact: Beth McGreevy, MarCom Manager firstname.lastname@example.orgPrint Version
Hittite Microwave Corporation
2 Elizabeth Drive
Chelmsford, MA 01824
Hittite Microwave (Chelmsford, MA USA) is an ISO 9001:2008 and AS9100:2009 Certified Designer and Manufacturer
978-250-3343 | email@example.com